Lontape Flooring Adhesive Tape

Lonseal Flooring Adhesive Tape is an adhesive substrate used to secure Lonseal flooring to base materials in trucks, trailers, vans, boats and more. This laminate flooring adhesive tape will make the installation of Lonseal flooring easier and give you peace of mind that you can move at your own pace without the concern of an adhesive tacking up before your installation is complete.

Easy to apply, simply unroll the tape and place the adhesive side down on base materials, leaving the red film attached to the top of the tape to prevent accumulation of dirt, dust and debris. Cover the entire flooring area with tape and use a silicone roller to remove air bubbles underneath the tape. Once the flooring area is fully covered, begin to pull up strips of the red backing film to reveal the adhesive on top, starting in the center of the floor and laying your Lonseal Flooring in stages, using a flooring roller to remove air bubbles as you go.

The main advantage to Lontape adhesive is the extended working time over Lonseal's epoxy, which allows the installer more time to be sure the flooring is laid securely and without bubbling.

Specifications

Sizes: 4" wide, 6" wide
• Roll Length: 108 Feet
• Thickness: 8 mil (0.02 mm) without liner
• Adhesion – Steel: 90 oz./in. (25 N/25 mm)
• Temperature Resistance (Cured)
  • 392 °F (200.0 °C) short term
  • 176 °F (80.0 °C) long term
• Shelf Life: 1 year when stored properly
• Storage Conditions: 65 °F – 85 °F (18.3 °C – 29.4 °C); keep dry and out of direct sunlight in a well-ventilated area.
• Application Conditions: 65 °F – 85 °F (18.3 °C – 29.4 °C)

For More Information on Lonseal Installation, click this link: Lonseal Vehicle installation.pdf