SURFACE PREPARATION: DO NOT APPLY TO VINYLS.
All surfaces to be sealed must be free of any oils, dust or other foreign matter.
USE ADEQUATE VENTILATION.
Allow 20 -30 minutes dry time before applying additional coats of PLASTISEAM.
Allow 4 hours dry time minimum, overnight for best results.
Seams sealed with PLASTISEAM can stick together if not completely dry before folding or storing or if stored above 100°F.
HINTS:
Recommended thinner is Toluene. Allow to dry overnight whenever possible.
Avoid excessive air movement, heat or humidity. Always use proper ventilation and protection.